EchoTherm™ IC35 Large, Heavy-Duty Digital, Programmable, Electronic Chilling/Heating Dry Bath

Your Fully Programmable Personal Bench Top Incubator/Chiller/Freezer

Optional Models:

XT Model (chilling range expanded to -20°C)

IC35 $1,640.00
IC35XT $1,850.00

Features:

5-program memory
Energy-efficient Peltier design
Digital control to 1°C from -10°C to 100°C
Control at ambient
Built-in data logger
Count down timer (up to 30 days) with audible alarm and user settable Auto-Off
RS232 I/O port for data collection
Electronic calibration. Factory set, but user settable to any local standard
Compact size. Uses very little bench space
12-month warranty
UL, CSA and CE compliant

Applications Include:

Unattended restriction digestions or ligations at elevated temperatures then reducing temperature to 4°C automatically to reduce non-specific nuclease digestion of target DNA
Automatically stopping reactions by having the unit reduce sample temperature after a specific reaction time
Producing denatured probes or single stranded DNA molecules by heating to 90°C to 95°C for a given time and rapidly reducing temperature to 4°C to prevent renaturation
Automatic temperature profiles to grow bacteria at 37°C, then increasing temperature to induce events, and then lowering temperature to 4°C to prevent degradation
Maintaining 14°C for ligation reactions
Maintaining 17°C for storing oocytes
Storing samples at ice bucket temperatures without the mess
Incubating samples at 37°C in 96-well assay plates or in aluminum blocks holding 0.2, 0.5, 1.5 ml centrifuge tubes, vials, and test tubes
Storing enzyme or DNA libraries at your workstation
Enzyme reactions and deactivations
Cooling blood samples prior to coagulation testing
Freezing and storing most any sample at your workstation
Working directly on large plate surface

Product Description:

The completely solid-state EchoTherm™ IC35 Large, Heavy-Duty, Digital, Programmable, Electronic Chilling/Heating Dry Bath is versatile, reliable and easy to use. The IC35 has simple digital controls and a two-line alphanumeric display that is backlit for easy reading. The display shows both the target and actual temperatures. Additionally, it is used to display the timer and all programming functions.

The chilling/heating surface is a 5” (12.7 cm) square aluminum plate that is very flat for optimal contact with the sample. When unloaded, the plate will go below 0°C in under two minutes. It will heat to 37°C even faster. Generally, the unloaded surface will decrease temperature at about 3°C/minute. Heating rates on the unloaded plate are usually about 5°C/minute. The blocks sold as accessories range in size and mass depending upon the samples used. The unit can drive the biggest block from ambient temperature to 4°C in less than 30 minutes. When used with an accessory cover these blocks can be driven below 0°C. Temperature gradients from the center to the edge of any accessory block will be less than 0.5°C at any temperature.

: The above graph shows a temperature/time profile that can be stored in memory and recalled instantly to be run at any time. The profile was plotted after the data points were collected in buffer. The buffer was then dumped via the RS232 port to a PC. Five programs of as many as ten steps each can be stored in memory. Each step is a temperature and time. Each program can be set to repeat itself up to 99 times.

Product Specification:

Temperature:
Range	-10°C to 100°C (minimum temperature possible is 30°C below ambient)
Readability	1°C
Accuracy	±1°C
Stability	±1°C
Sensor Type	Platinum RTD
Controller Type	PID
Uniformity	±0.5°C

Timer:
Range	00:01 to 30 days
Readability	1 second
Audible Alarm	Yes, alarm sounds for 1 minute. Timer counts up until UP or DOWN key is touched

Programming:
Programs Stored	5
Individual Program Capacity	10 Steps
Program Repeat	1–99 times
Memory Backup	Yes, in CMOS

Data Logger:
Sample times	1 sec, 1 min or 5 minutes per data point
Capability	7825 data points

Electrical:
Heater/Chiller	Peltier, 100 watts
Operating Voltages	100-265 VAC, 50/60 Hz
Power Consumption	100 watts maximum
Power Switch	Yes

Dimensions:
Chilling/Heating Module
Width	8.5” (21.6 cm)
Depth	10” (25.4 cm)
Height	4” (10.2 cm)
Weight	8 lbs (3.64 kg)

Accessories Available:

620-5512 Block, Hi-Capacity, 100-0.5 ml centrifuge tubes	$285.00
620-5513 Block, Hi-Capacity, 64-1.5 ml centrifuge tubes	$260.00
620-5514 Block, Hi-Capacity, 45-0.5 ml and 32-1.5 ml tubes	$360.00
620-5515 Block, Hi-Capacity, 2-96 hole for PCR tubes and plates	$260.00
620-5516 Block, aluminum, V-bottom 96-well assay plates	$310.00
620-5517 Block, aluminum, round bottom 96-well assay plates	$310.00
620-5518 Block, Hi-Capacity, 49-2.0 ml vials	$260.00
620-5519 Block, aluminum, 384 holes for 384-well assay plates	$360.00
620-5520 Block, Hi-Capacity, 2-assay plates	$310.00
620-5521 Block, Hi-Capacity, 49-10 mm test tubes	$260.00
620-5522 Block, Hi-Capacity, 25-15/16 mm test tubes	$260.00
620-5523 Block, Hi-Capacity, 49-12/13 mm test tubes	$260.00
620-5524 Block, aluminum, 8-20 mm, 12-12/13 mm and 8-6 mm test tubes	$285.00
620-5525 Block, Hi-Capacity,16-20 mm test tubes	$230.00
620-5526 Block, Hi-Capacity, 100-6 mm test tubes	$260.00
620-5527 Block, Hi-Capacity, 16-15 ml centrifuge tubes	$385.00
620-5528 Block, Hi-Capacity, 16-20 ml scintillation vials	$285.00
620-5530 Block, Hi-Capacity, 9-50 ml centifiuge tubes	$360.00
620-5532 Block, Hi-Capacity, 64-2.0 ml Eppendorf tubes	$260.00
620-5550 Block, 9-10 ml round-bottom flasks	$260.00
620-5551 Block, 9-25 ml round-bottom flasks	$260.00
620-5552 Block, 5-50 ml round-bottom flasks	$260.00
620-5553 Block, 5-100 ml round-bottom flasks	$260.00
620-5554 Block, 4-250 ml round-bottom flasks	$285.00
720-5509 Cover for aluminum block	$60.00

Search

Shopping Cart

Products