EchoTherm™ HP51 and HS51 Large Capacity Simple Digital Hot Plates and Stirring Hot Plates
Heat, stir and time accurately with east to use, fully featured, 12” x 12” surface large capacity hot plates and stirring hot plates.
HP51 $1,195.00
HP51A $1,230.00
HS51 $1,265.00
HS51A $1,320.00
Features:
- Extremely easy use by anyone in your lab
- Two memory buttons for storing your favorite settings for heater and stirrer for instant, one-button recall and use
- Platinum RTD temperature measurement for precision and accuracy
- Solid ceramic heater top for quick heating on a flat, white, chemically resistant surface. Milled flat cast aluminum top also available
- Cast aluminum framed ceramic heater top edges stay cooler to prevent burns
- PID temperature control for exact, tight sample control of plate or solution
- Timer goes up to 99 hours, 59 minutes, 59 seconds with settable Auto-Off for exactly timed sample preparation
- Electronic calibration stored in chip. No batteries to replace
- 12” (30.48 cm) ceramic glass or aluminum tops
- Strong motor and magnet for stirring most samples
- Full featured digital display for checking all parameters instantly
- Fused for safety
- ETL, CSA and CE certified
- RS232 interface for control or for data collection on a computer
Product Description:
The EchoTherm HP51 and HS51 are designed to be the easiest to use and most accurate fully featured hot plates and stirring hot plates in the world. Temperature measurement of a solution is accurate to 1% over the entire temperature range using a 100 ohm platinum RTD sensor and measurement system.
Calibration of temperature is electronic and stored in memory. The calibration is set at the factory but can be done easily in the field using the probe calibration kit offered as an accessory.
The chassis on both models is cast aluminum designed to keep spills and heat out of the electronics. They are coated with chemically resistant epoxy based paint for durability.
Product Specification:
| Hot Plate: |
| Dimensions |
12” (30.48 cm) x 12” (30.48 cm) |
| Maximum temperature of the plate surface |
ceramic top: 450°C; cast aluminum top: 400°C |
| Temperature control type |
PID |
| Temperature accuracy |
1% |
| Temperature regulation, solution or plate |
±1°C |
| Heater power in watts |
ceramic top: 1400 watts; aluminum top: 1400 watts |
| Temperature Measurement: |
| Platinum RTD |
100 ohm, in plate and in probe |
| Range |
ceramic top: 0–450°C; aluminum top: 0–400°C |
| Readability |
1°C |
| Stirrer: |
| Speed range unloaded |
100–1500 rpm |
| Readability |
10 rpm |
| Settability |
nearest 10 rpm |
| Electrical: |
| Available in |
100, 115 and 230 VAC, 50/60 Hz |
| Ceramic top |
100 and 115 VAC, 12 amp; 230 VAC, 6 amp |
| Aluminum top |
100 and 115 VAC, 12 amp; 230 VAC, 6 amp |
| Fused |
Yes |
| Line cord |
Detachable, 6 foot (1.8 meter), three-wire grounded |
| General: |
| Dimensions, unpacked: |
| Ceramic top |
12.5” (31.75 cm) wide, 17.0” (43.18 cm) deep, 4.5” (11.43 cm) high |
| Aluminum top |
12.5” (31.75 cm) wide, 17.0” (43.18 cm) deep, 4.5” (11.43 cm) high |
| Dimensions, packed |
| Ceramic and aluminum tops |
20.0” (50.8 cm) by 16.0” (40.64 cm) by 9.0” (22.86 cm) |
| Weight, unpacked |
| Ceramic top |
18 lbs (8.4 kg) |
| Aluminum top |
19 lbs (8.6 kg) |
| Weight, packed |
| Ceramic top |
20 lbs (9.0 kg) |
| Aluminum top |
21 lbs (9.5 kg) |
Accessories Available:
| HS30-600 Probe, Immersion, 6” stainless steel |
$90.00 |
| HS30-601 Probe, Immersion, 10” stainless steel (supplied with unit) |
$111.00 |
| HS30-602 Probe, Immersion, 6” solid Teflon |
$98.00 |
| HS30-603 Probe, Immersion, 6” solid glass |
$170.00 |
| HS30-700 Temperature Probe Calibration Kit |
$47.00 |
| HS30-800 Plate and Probe Calibration Kit |
$206.00 |
